10G Base LRM Optical Transceiver 220M MMF 1310nm SFP+ Optical Module
10G 220m MMF Optical Module Features:
10Gb/s serial optical interface compliant to 802.3aq 10GBASE-LRM
1310nm DFB transmitter, PIN photo-detector
Duplex LC connector
Metal enclosure, for lower EMI
Electrical interface compliant to SFF-8431
Specifications for 10 Gigabit “SFP+”
2-wire interface for management specifications
Compliant with SFF 8472
Single 3.3V power supply
220M legacy OM1 MMF Transmission
Case operating temperature range:-5°C to 70°C
PPLICATIONS
10GBASE-LRM 10G Ethernet
STANDARD
Compliant with SFF-8472 SFP+ MSA.
Compliant to SFP+ SFF-8431 and SFF-8432.
Compliant to 802.3ae 10GBASE-LRM.
RoHS Compliant
Digital Diagnostic Functions
TOPSTAR TOP-SFP+-10G-LRM transceivers support the 2-wire serial communication protocol as defined in the SFP
MSA1.
The standard SFP serial ID provides access to identification information that describes the transceiver’s
capabilities, standard interfaces, manufacturer, and other information.
Additionally, TOPSTAR SFP+ transceivers provide a unique enhanced digital diagnostic monitoring interface,
which allows real-time access to device operating parameters such as transceiver temperature, laser bias
current, transmitted optical power, received optical power and transceiver supply voltage. It also defines a
sophisticated system of alarm and warning flags, which alerts end-users when particular operating parameters
are outside of a factory set normal range.
The SFP MSA defines a 256-byte memory map in EEPROM that is accessible over a 2-wire serial interface at
the 8 bit address 1010000X (A0h).The digital diagnostic monitoring interface makes use of the 8 bit address
1010001X (A2h), so the originally defined serial ID memory map remains unchanged.
The operating and diagnostics information is monitored and reported by a Digital Diagnostics Transceiver
Controller (DDTC) inside the transceiver, which is accessed through a 2-wire serial interface. When the serial
protocol is activated, the serial clock signal (SCL, Mod Def 1) is generated by the host. The positive edge clocks
data into the SFP transceiver into those segments of the E2PROM that are not write-protected. The negative
edge clocks data from the SFP transceiver. The serial data signal (SDA, Mod Def 2) is bi-directional for serial
data transfer. The host uses SDA in conjunction with SCL to mark the start and end of serial protocol activation.
The memories are organized as a series of 8-bit data words that can be addressed individually or sequentially
10G SFP+ 1310nm 220M Optical Module Specification
| Fiber Type |
MMF |
| Connector |
LC |
| Lasers |
EML |
|
Case operating temperature range
|
-5°C to 70°C
|
|
Storage Temperature
|
-40-+85
|
| Extinction Ratio |
3.5 dB |
| Certification |
CE |
| Single Power Supply |
3.3V |
FAQ
Q1. Are your Optical Transceivers original?
A1.Yes, all our optical transceivers are guaranteed 100% original!
Q2.How do you guarantee the quality of SFP?
A2.We have professional testing equipment and QC team. Every unit will be fully tested with perfect performance before shipping.
Q3. What will you do if I found the product has any quality problem?
A3.We back up every sale with our risk-free money-back guarantee! You can buy with confidence from a company in good faith that has been serving its clients for over 10 years! Our dream is to build a famous 100 years enterprise!
Q4. What's the advantage of your company ?
Excellent track records with 12 years continuously no single major quality problem,
More than 20% year-on-year growth in sales during the past 12 years.
Stocks holds more than 200,000 transceivers at any one time for immediate delivery
Warranty: 3 Year
Q5. Do you have compatible ones?
A5.Yes, we have our own brand:Top-trans, including 1X9,SFP, XFP, SFP+, BIDI in all kinds of specifications.
Q6.Which Brand can be compatible of your module ?
HuaWei ,HP,H3C,Juniper,Dell,Intel ,Avago ,Finisar ect
