Product Details:
|
Center Wavelength: | 1295, 1300, 1304, 1309nm | Temperature: | 0°C~+70°C |
---|---|---|---|
Form Factor: | QSFP28 100G | Weight: | 0.05KG/PCS |
Protocol: | IEEE 802.3bm QSFP28 MSA | Core Size: | G.652 |
Highlight: | CE QSFP28 100GBASE LR4,Chelsio Compatible QSFP28 100GBASE LR4,10km Ethernet Transceiver |
QSFP28 100GBASE-LR4 100G Ethernet Transceiver Long Reach AT-QSFP28-LR4 Chelsio compatible
Chelsio compatible QSFP28 100G LR4 10km Transceiver's Characteristics:
Chelsio’s SM100G-LR QSFP28 transceiver modules are fully compliant with IEEE 802.3ba and IEEE 802.3bj specifications; and adhere to RoHS-6 standards.
The T6 adapters with SM100G-LR transceiver modules enable a unified wire for LAN, SAN, and cluster traffic. Built upon a combination of high bandwidth and low latency architecture, the T6 solution offers a complete set of storage and cluster protocols operating over Ethernet (iSCSI, FCoE and iWARP).
T6 solution’s port-to-port and adapter-to-adapter failover features are ideal for critical applications that require redundancy and high-availability capabilities. Full Software suite was run with these optical modules and Chelsio recommends using these transceiver modules only with Chelsio adapters to allow the adapter warranty and support structure to remain intact.
Features
• Hot-pluggable QSFP28 footprint
• Positive retention pull-release latch system
• 100G Ethernet maximum bit rate
• Built-in digital diagnostic functions
• Cost-effective and optimized for highspeed datacenter interconnects
Applications
• 100GBASE-LR4 100G Ethernet
• Rack-to-Rack, Shelf-to-Shelf Interconnect
• High Performance Networking, Storage, and clusters
• Hubs, switches, routers, servers Specifications
• IEEE 802.3bj (100GbE over copper/backplane)
• IEEE 802.3ba (40/100GbE)
Regulatory Compliance
• Class 1 laser product • TUV and CSA certified
• Class 1 safety compliant Physical and Environmental
• RoHS-6 compliant (lead-free)
• Operating temperature: 0°C to 70°C
• Power dissipation <3.5W
• Single 3.3V power supply
• Maximum link length of 10 km on Single Mode Fiber (SMF)
Compatible Adapters
• T62100-CR
• T62100-LP-CR
• T62100-SO-CR
• T61100-OCP
Parameters for the Chelsio compatible QSFP28 100G Optical Transceiver:
Fiber Type | OS2 single-mode fiber |
Connector | LC |
Transmit and Receive Wavelength (nm) | 1295, 1300, 1304, 1309nm |
Pull Tab Color | Blue |
Lasers and TIA | DFB and PIN |
Tx Power | -4.3 to 4.5 dBm |
Rx Sensitivity | -10.6 to 4.5 dBm |
Extinction Ratio | 2.0 dB |
Power Consumption | <3.5W |
Single Power Supply | 3.3 V |
Dimensions | (H x W x D)13.5 x 18.4 x 72.4 mm |
Photo for Chelsio compatible QSFP28 100G 10km Compatible Transceiver
Our sale will make the best quote meeting your expectation
Can you ship this SFP module to my place?
Nokia-Alcatel, Ericsson, Cisco, Dell-EMC, Juniper, Arista, Extreme Network, Fortinet, 3COM, BDCOM, ZTE, DCN
Contact Person: Ms. Vicky Tian
Tel: +86 19860146913
Fax: 86-0755-82552969